Cerakote
Cerakote service · colors · pricing · process
Compare starting prices for Cerakote and Hydrographics, find your project, then send the exact item, finish and photos for a project-specific quote.
The prices below are starting shop prices. Final cost depends on the actual item, condition, preparation, masking, size, complexity and requested finish. For the most accurate number, send photos through the quote builder.
The Cerakote prices in the guide remain the starting price for the item. Custom colors, masking and artistic pattern work are added when the project requires additional spray, flash, masking or layout stages.
This tool belongs here on the pricing page: use it when your part is not listed below. Enter the full outside measurements of one part, choose its shape and finish, then multiply by the number of parts. For a listed item, use the published starting price in the guide.
Measuring note: Use a flexible fabric tape against the surface, especially for curved items. For a helmet, measure around its widest outside circumference and from rim to rim over the crown. Enter those complete measurements, not a straight-line width or just the printed design area.
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Semi-Auto Pistol — complete | $210 | $285 |
| 1911 / 2011 — complete | $235 | $305 |
| Revolver — complete | $235 | $300 |
| AR-15 — complete | $310 | $425 |
| AR-10 / LR-308 — complete | $365 | $475 |
| AK Platform — complete | $365 | $460 |
| Bolt-Action Rifle — complete | $280 | $365 |
| Lever-Action Rifle — complete | $300 | $400 |
| Semi-Auto Sporting Rifle — complete | $300 | $400 |
| Pump Shotgun — complete | $280 | $365 |
| Semi-Auto Shotgun — complete | $300 | $400 |
| Over/Under Shotgun — complete | $325 | $425 |
| Side-by-Side Shotgun — complete | $325 | $425 |
| Single-Shot Rifle / Shotgun — complete | $235 | $305 |
| Muzzleloader / Black Powder Rifle — complete | $280 | $365 |
| Pistol-Caliber Carbine — complete | $300 | $400 |
| Bullpup Rifle — complete | $345 | $460 |
| Chassis Rifle — complete | $365 | $490 |
| Rimfire Rifle — complete | $260 | $335 |
| Rimfire Pistol — complete | $195 | $255 |
| NFA / Serialized Specialty Firearm — complete | Quote | Quote |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Pistol slide | $95 | $115 |
| Pistol frame | $105 | $140 |
| Pistol barrel | $70 | $70 |
| Pistol grip panels — pair | $45 | $60 |
| Pistol magazine | $30 | $45 |
| Magazine baseplate | $25 | $35 |
| Magazine extension | $25 | $35 |
| Trigger | $30 | N/A |
| Hammer | $30 | N/A |
| Safety / selector | $25 | N/A |
| Slide stop / release | $25 | N/A |
| Takedown lever | $25 | N/A |
| Backstrap | $25 | $35 |
| Optics plate | $25 | N/A |
| Compensator | $40 | N/A |
| Revolver frame | $140 | $180 |
| Revolver cylinder | $75 | $95 |
| Revolver barrel | $65 | $85 |
| Revolver grips — pair | $45 | $60 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Upper receiver | $80 | $120 |
| Lower receiver | $80 | $120 |
| Upper + lower receiver set | $150 | $230 |
| Handguard — under 10 in. | $80 | $115 |
| Handguard — 10–15 in. | $95 | $120 |
| Handguard — over 15 in. | $110 | $140 |
| Barrel | $95 | $120 |
| Fixed stock | $75 | $115 |
| Collapsible stock | $80 | $135 |
| Pistol grip | $40 | $55 |
| Buffer tube | $35 | N/A |
| Magazine | $30 | $45 |
| Gas block | $30 | N/A |
| Gas tube | $25 | N/A |
| Muzzle device | $35 | N/A |
| Charging handle | $30 | N/A |
| Bolt carrier — exterior | $45 | N/A |
| Dust cover | $25 | $35 |
| Forward assist | $25 | N/A |
| Small controls / accent set | $45 | N/A |
| Furniture package — stock, grip, handguard | $160 | $215 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| AK receiver | $110 | $135 |
| AK dust cover | $55 | $75 |
| AK handguard set | $95 | $135 |
| AK stock | $80 | $120 |
| AK pistol grip | $40 | $55 |
| AK magazine | $30 | $45 |
| AK barrel | $95 | $120 |
| AK gas tube | $40 | N/A |
| AK muzzle device | $35 | N/A |
| FAL / G3 / similar receiver | $125 | $160 |
| FAL / G3 furniture set | $150 | $205 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Rifle barreled action | $160 | $215 |
| Rifle stock — standard | $125 | $170 |
| Rifle stock — thumbhole | $140 | $190 |
| Rifle stock — chassis style | $160 | $215 |
| Rifle bottom metal / floor plate | $45 | $60 |
| Rifle bolt body / handle | $45 | N/A |
| Trigger guard | $40 | $55 |
| Shotgun receiver | $110 | $135 |
| Shotgun barrel — single | $115 | $150 |
| Shotgun double barrel set | $155 | $195 |
| Shotgun stock | $100 | $135 |
| Shotgun forend | $80 | $115 |
| Shotgun stock + forend set | $165 | $215 |
| Shotgun magazine tube | $55 | $70 |
| Shotgun magazine extension | $45 | $60 |
| Choke tube — each | $25 | N/A |
| Muzzleloader stock | $125 | $170 |
| Muzzleloader barrel / action | $150 | $205 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Rifle scope — standard | $110 | $155 |
| Large / long-range scope | $140 | $205 |
| Red-dot optic — exterior only | $80 | $135 |
| Scope rings — pair | $40 | $50 |
| Scope base / rail | $35 | $45 |
| Bipod | $75 | $100 |
| Weapon light — exterior only | $75 | $115 |
| Sling hardware set | $30 | N/A |
| Cheek riser | $40 | $50 |
| Vertical / angled foregrip | $40 | $50 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Valve cover — single | $145 | $155 |
| Valve covers — pair | $265 | $275 |
| Engine cover | $160 | $220 |
| Intake manifold | $260 | $295 |
| Cold-air intake tube | $110 | $125 |
| Brake caliper — each | $115 | $185 |
| Brake calipers — set of 4 | $420 | $610 |
| Wheel / rim — each | $180 | $195 |
| Center cap — each | $40 | $60 |
| Interior trim piece — small | $65 | $110 |
| Interior trim piece — medium | $95 | $155 |
| Dash trim set | $280 | $460 |
| Mirror cap — each | $75 | $115 |
| Door handle — each | $45 | $80 |
| Grille — standard | $215 | $365 |
| Turbo compressor housing | $150 | $240 |
| Exhaust tip | $75 | $120 |
| Heat shield | $85 | $170 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Motorcycle gas tank | $280 | $425 |
| Front fender | $130 | $150 |
| Rear fender | $150 | $195 |
| Side cover — each | $85 | $75 |
| Fairing — small | $130 | $215 |
| Fairing — large | $235 | $400 |
| Saddlebag — each | $215 | $270 |
| Motorcycle wheel — each | $180 | $195 |
| ATV plastics — small set | $410 | $670 |
| ATV plastics — large set | $600 | $975 |
| UTV dash / console | $215 | $220 |
| Snowmobile hood | $280 | $415 |
| Snowmobile full body panels | $625 | $975 |
| Golf cart body — standard | $600 | $975 |
| Golf cart roof | $300 | $295 |
| Golf cart wheel — each | $130 | $125 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Compound bow — complete | $235 | $365 |
| Crossbow — complete | $260 | $400 |
| Bow riser | $120 | $150 |
| Bow limbs — pair | $130 | $150 |
| Golf club head — each | $50 | $50 |
| Golf putter | $65 | $110 |
| Paintball marker body | $150 | $175 |
| Paintball hopper shell | $65 | $85 |
| Paintball tank exterior | $75 | $85 |
| Football helmet shell | $130 | $175 |
| Baseball / softball helmet | $110 | $185 |
| Welding helmet shell | $110 | $185 |
| Hard hat | $80 | $95 |
| Deer skull | $150 | $275 |
| Fishing reel body | $80 | $135 |
| Tackle box shell | $110 | $185 |
| Item / Service | Cerakote | Hydrographics |
|---|---|---|
| Game controller shell | $55 | $65 |
| Game console shell | $130 | $125 |
| Computer case panels | $150 | $275 |
| Keyboard case / frame | $80 | $135 |
| Power-tool housing — small | $65 | $115 |
| Power-tool housing — large | $95 | $170 |
| Toolbox — small | $150 | $275 |
| Toolbox — large | $260 | $460 |
| Tumbler / insulated cup | $45 | $80 |
| Mailbox | $110 | $125 |
| Ceiling fan blade — each | $40 | $70 |
| Switch / outlet plate | $25 | $45 |
| Cabinet hardware set — up to 10 | $110 | $185 |
| Guitar body | $195 | $245 |
| Drum shell — small | $130 | $125 |
| Drum shell — large | $195 | $220 |
Starting prices are useful for planning. Photos and project details let IKKIN review the actual preparation, finish and complexity before work begins.
START YOUR PROJECT QUOTE →Pricing depends on the part, substrate, condition, preparation and finish. These focused guides help narrow the project before a final quote.