Item & Preparation
The size, material, condition and existing finish can change the amount of preparation required before coating.
Published starting prices for common custom-finishing projects. Search the list or jump by category.
IKKIN publishes starting prices on this page so customers can estimate a project before requesting an exact quote. Final Cerakote cost depends on the actual item and the work required to prepare and finish it correctly.
The size, material, condition and existing finish can change the amount of preparation required before coating.
Single-color work is different from projects using additional colors, distressed finishes, stencils or complex multi-layer designs.
Browse Cerakote colors, then use the quote builder to send photos and project details for an exact quote.
| Item / Project | IKKIN Price |
|---|---|
| Valve cover — each | Starting at $145 |
| Valve cover — pair | Starting at $265 |
| Brake caliper — each | Starting at $115 |
| Brake caliper — set of 4 | Starting at $420 |
| Intake component | Starting at $130 |
| Turbo compressor housing | Starting at $150 |
| Turbo hot-side housing | Starting at $170 |
| Exhaust tip — each | Starting at $65 |
| Heat shield | Starting at $85 |
| 4-cylinder header | Starting at $195 |
| V6/V8 header pair | Starting at $300 |
| Short header — each | Starting at $150 |
| Motorcycle 2-into-1 exhaust | Starting at $195 |
| Motorcycle muffler | Starting at $110 |
| Exhaust tubing — per linear ft | Starting at $25 |
| Piston crown — each | Starting at $45 |
| Engine bracket — small | Starting at $55 |
| Engine bracket — large | Starting at $85 |
| Pulley | Starting at $75 |
| Item / Project | IKKIN Price |
|---|---|
| Motorcycle wheel — each | Starting at $180 |
| Motorcycle hub | Starting at $85 |
| Motorcycle fork lowers — pair | Starting at $195 |
| Triple tree | Starting at $150 |
| Handlebars | Starting at $130 |
| Foot pegs — pair | Starting at $85 |
| Levers — pair | Starting at $75 |
| Controls / housings — pair | Starting at $110 |
| Primary cover | Starting at $150 |
| Derby cover | Starting at $75 |
| ATV wheel — each | Starting at $130 |
| UTV wheel — each | Starting at $150 |
| Suspension component — small | Starting at $85 |
| Suspension component — large | Starting at $150 |
| Item / Project | IKKIN Price |
|---|---|
| Fixed blade up to 10 in | Starting at $65 |
| Folding knife | Starting at $80 |
| Knife scales — pair | Starting at $55 |
| Hatchet / small axe head | Starting at $95 |
| Large axe head | Starting at $120 |
| Large blade / machete | Starting at $150 |
| Hand tool — small | Starting at $30 |
| Hand tool — medium | Starting at $45 |
| Hand tool — large | Starting at $75 |
| Flashlight body | Starting at $65 |
| Metal game call | Starting at $45 |
| Fishing reel — metal housing | Starting at $85 |
| Item / Project | IKKIN Price |
|---|---|
| Golf club head | Starting at $50 |
| Golf putter head | Starting at $55 |
| Golf shaft | Starting at $25 |
| 20 oz tumbler | Starting at $45 |
| 30–40 oz tumbler | Starting at $50 |
| Water bottle | Starting at $50 |
| Metal sunglasses frame | Starting at $45 |
| Metal stapler | Starting at $65 |
| Metal pen | Starting at $35 |
| Belt buckle | Starting at $45 |
| Watch case — stripped | Starting at $75 |
| Bike component — small | Starting at $55 |
| Bike crank / arm | Starting at $85 |
| Bike frame — stripped | Starting at $325 |
| Item / Project | IKKIN Price |
|---|---|
| Pistol slide — one color | Starting at $95 |
| Pistol frame — one color | Starting at $105 |
| Pistol complete exterior — one color | Starting at $210 |
| Revolver exterior — one color | Starting at $235 |
| Rifle receiver set — one color | Starting at $195 |
| Rifle handguard — one color | Starting at $130 |
| Rifle stock — one color | Starting at $130 |
| Shotgun receiver — one color | Starting at $110 |
| Shotgun stock & forend — one color | Starting at $150 |
| Barrel — one color | Starting at $75 |
| Magazine — one color | Starting at $40 |
| Scope exterior — masked | Starting at $150 |
| Brake caliper — each | Starting at $115 |
| Brake caliper — set of 4 | Starting at $420 |
| Turbo housing — hot side | Starting at $150 |
| Exhaust tip — each | Starting at $65 |
| Heat shield — small | Starting at $75 |
| Heat shield — large | Starting at $130 |
| 4-cylinder header | Starting at $195 |
| V6/V8 header pair | Starting at $300 |
| Motorcycle exhaust — 2 into 1 | Starting at $195 |
| Muffler / canister | Starting at $80 |
| Intake component — small | Starting at $80 |
| Intake component — large | Starting at $130 |
| Wheel center cap — each | Starting at $40 |
| Bicycle frame — bare | Starting at $260 |
| Bicycle fork | Starting at $95 |
| Handlebar | Starting at $75 |
| Stem | Starting at $45 |
| Pedal set | Starting at $55 |
| Golf club head — each | Starting at $50 |
| Golf putter head | Starting at $55 |
| Golf shaft | Starting at $25 |
| 20 oz tumbler | Starting at $45 |
| 30–40 oz tumbler | Starting at $50 |
| Water bottle | Starting at $50 |
| Game controller shell | Starting at $55 |
| Stapler — metal | Starting at $55 |
| Hand tool — small | Starting at $30 |
| Hatchet / small axe | Starting at $95 |
| Large blade / tool | Starting at $150 |
| Knife scales — pair | Starting at $55 |
| Hard hat shell | Starting at $80 |
| Welding hood shell | Starting at $110 |
| Mailbox | Starting at $110 |
| Light fixture / metal housing | Starting at $75 |
| Cabinet hardware — 4 pieces | Starting at $65 |
| Door hardware set | Starting at $80 |
| Marine cleat — each | Starting at $40 |
| Marine hardware — small | Starting at $40 |
| Marine hardware — medium | Starting at $75 |
| Small production part — 10+ identical | Quote by batch |
The listed amounts are published starting prices. Final pricing depends on the actual project, preparation, color count and complexity.
Two similar items can require different preparation or finishing work. Additional colors and more involved custom designs can also change the final price.
Review the starting prices, browse the Cerakote color catalog, then send project photos through the quote builder.