Published starting prices for professional hydrographics projects from IKKIN Dip It in Rochester, NY. Search the list or jump by category to estimate your project before requesting an exact quote.
Hydro dipping prices depend on the actual item and the work required to prepare and finish it correctly. IKKIN publishes starting prices below so you can plan a project before sending photos for a project-specific quote.
Larger parts and complex three-dimensional shapes require more preparation, film, handling and finishing time.
Existing coatings, damage, corrosion and the condition of the substrate can change the amount of preparation required before the pattern is applied.
Film selection, orientation, multiple pieces and projects that must visually align can affect the final project cost.
The completed pattern is protected with an appropriate clear system. Project requirements and the requested sheen can affect the finishing work.
Need an exact price? Use the published starting prices below, then send photos through the quote builder so IKKIN can review the actual item, condition and finish.
| Item / Project | IKKIN Price |
|---|---|
| Valve cover — 4/6 cylinder | Starting at $155 |
| Valve cover — V8 pair | Starting at $275 |
| DOHC / oversized valve cover | Starting at $170 |
| Engine cover | Starting at $220 |
| Coil covers — pair | Starting at $170 |
| Intake manifold | Starting at $295 |
| Cold-air intake tube | Starting at $125 |
| Air cleaner / breather | Starting at $95 |
| Fuse / battery cover | Starting at $75 |
| Timing cover | Starting at $95 |
| Radiator cover | Starting at $125 |
| Dash bezel | Starting at $125 |
| Radio / HVAC bezel | Starting at $85 |
| Center-console trim | Starting at $125 |
| Interior trim kit — small | Starting at $220 |
| Interior trim kit — large | Starting at $345 |
| Steering wheel trim | Starting at $125 |
| Door handles — pair | Starting at $85 |
| Mirror covers — pair | Starting at $125 |
| Vent visors — pair | Starting at $75 |
| Fuel door | Starting at $65 |
| Bug shield | Starting at $150 |
| Grille — small | Starting at $170 |
| Grille — large | Starting at $270 |
| Fender flare — each | Starting at $125 |
| Spoiler / wing | Starting at $220 |
| Wheel center cap — each | Starting at $55 |
| Hubcaps — set of 4 | Starting at $220 |
| Wheel 14–18 in — each | Starting at $195 |
| Wheel 19–22 in — each | Starting at $235 |
| Nitrous bottle | Starting at $170 |
| Item / Project | IKKIN Price |
|---|---|
| Motorcycle fuel tank | Starting at $320 |
| Front fender | Starting at $150 |
| Rear fender | Starting at $195 |
| Side cover — each | Starting at $75 |
| Outer fairing | Starting at $270 |
| Inner fairing | Starting at $295 |
| Center console | Starting at $125 |
| Wind deflector — each | Starting at $65 |
| Horn cover | Starting at $65 |
| Air cleaner cover | Starting at $75 |
| Saddlebag — each | Starting at $270 |
| Tour-Pak / trunk | Starting at $345 |
| Sport-bike fairing set | Starting at $1,415 |
| Café racer set | Starting at $1,610 |
| Full bagger body set | Starting at $2,440 |
| Dirt-bike plastics set | Starting at $490 |
| Snowmobile hood | Starting at $415 |
| Snowmobile full body set | Starting at $830 |
| Item / Project | IKKIN Price |
|---|---|
| ATV plastics — youth/small | Starting at $490 |
| ATV plastics — midsize | Starting at $635 |
| ATV plastics — large | Starting at $830 |
| ATV bumper | Starting at $150 |
| ATV handlebars | Starting at $85 |
| ATV wheel — each | Starting at $100 |
| UTV dash / console | Starting at $220 |
| UTV door panel — each | Starting at $195 |
| UTV body panel — small | Starting at $125 |
| UTV body panel — large | Starting at $220 |
| Golf-cart body | Starting at $830 |
| Golf-cart roof | Starting at $295 |
| Golf-cart door set | Starting at $295 |
| Golf-cart wheel — each | Starting at $125 |
| Item / Project | IKKIN Price |
|---|---|
| Full-face helmet | Starting at $225 |
| Open-face helmet | Starting at $175 |
| Motorcycle half helmet | Starting at $140 |
| Bicycle helmet | Starting at $95 |
| Baseball helmet | Starting at $95 |
| Football helmet shell | Starting at $175 |
| Hockey helmet shell | Starting at $150 |
| Hard hat | Starting at $95 |
| Welding hood | Starting at $125 |
| Golf club head — each | Starting at $50 |
| Golf putter head | Starting at $55 |
| Skateboard deck | Starting at $125 |
| Wakeboard | Starting at $220 |
| Kneeboard | Starting at $245 |
| Water ski — each | Starting at $170 |
| Paintball marker body | Starting at $175 |
| Paintball hopper | Starting at $85 |
| Paintball air tank | Starting at $85 |
| Paintball mask shell | Starting at $110 |
| Item / Project | IKKIN Price |
|---|---|
| Compound bow — complete exterior set | Starting at $415 |
| Bow riser | Starting at $150 |
| Bow limbs — pair | Starting at $150 |
| Bow quiver | Starting at $65 |
| Bow sight | Starting at $65 |
| Bow stabilizer | Starting at $60 |
| Game camera housing | Starting at $65 |
| Game call | Starting at $45 |
| Fishing reel housing | Starting at $85 |
| Fishing rod components / set | Starting at $75 |
| Tackle-box hard shell | Starting at $125 |
| Deer skull — cleaned | Starting at $125 |
| Elk skull — cleaned | Starting at $170 |
| Bear skull — cleaned | Starting at $150 |
| Small skull — cleaned | Starting at $85 |
| Cooler — 20 qt | Starting at $295 |
| Cooler — 45 qt | Starting at $465 |
| Cooler — 65 qt | Starting at $610 |
| Item / Project | IKKIN Price |
|---|---|
| Game controller shell | Starting at $65 |
| Game console shell | Starting at $125 |
| Computer mouse shell | Starting at $35 |
| Keyboard shell | Starting at $75 |
| PC case panels | Starting at $150 |
| Phone case — hard shell | Starting at $35 |
| Drone body shell | Starting at $95 |
| 20 oz tumbler | Starting at $55 |
| 30–40 oz tumbler | Starting at $65 |
| Water bottle | Starting at $65 |
| Mailbox | Starting at $125 |
| Ceiling-fan blade — each side | Starting at $40 |
| Picture frame — small | Starting at $55 |
| Picture frame — large | Starting at $85 |
| Electrical faceplate | Starting at $35 |
| Light-switch plate | Starting at $35 |
| Toilet seat — new only | Starting at $95 |
| Lamp base | Starting at $85 |
| Cabinet hardware — 4 pieces | Starting at $75 |
| Guitar body | Starting at $245 |
| Tool handle / small hand tool | Starting at $45 |
| Power-tool housing | Starting at $85 |
| Bicycle frame — bare frame | Starting at $320 |
| Bicycle fork | Starting at $125 |
| Bicycle handlebars | Starting at $85 |
| Bicycle fender — each | Starting at $75 |
| Bicycle pedal set | Starting at $65 |
| RC car body | Starting at $95 |
| RC controller shell | Starting at $75 |
| RC wheel set | Starting at $85 |
| Drone shell / body set | Starting at $125 |
| Guitar pickguard | Starting at $75 |
| Drum shell — small | Starting at $125 |
| Drum shell — large | Starting at $220 |
| Bowling ball | Starting at $150 |
| Walking cane handle / shaft | Starting at $85 |
| Towel bar / rack | Starting at $65 |
| Soap / lotion dispenser | Starting at $55 |
| Faucet handle set | Starting at $75 |
| Cabinet door — small | Starting at $125 |
| Thermostat housing | Starting at $45 |
| Small appliance housing | Starting at $85 |
| Stapler — metal shell | Starting at $65 |
| Chainsaw housing | Starting at $125 |
| Tool box panel — small | Starting at $95 |
| Tool box panel — large | Starting at $170 |
| Marine steering wheel | Starting at $170 |
| Boat cleat — each | Starting at $45 |
| Trolling motor housing | Starting at $170 |
| Boat paddle | Starting at $125 |
| Marine trim panel — small | Starting at $95 |
| Marine trim panel — large | Starting at $170 |
| License plate frame | Starting at $45 |
| Shifter knob | Starting at $55 |
| Emergency brake handle | Starting at $65 |
| Headlight bezel — each | Starting at $75 |
| Tail-light cover — pair | Starting at $95 |
| Vehicle emblem — each | Starting at $45 |
| Speaker box / enclosure panel | Starting at $170 |
| Trailer hitch receiver | Starting at $125 |
| Gas / oil can | Starting at $85 |
| Small hard case | Starting at $95 |
No. They are published starting prices. Final cost depends on the actual item, condition, preparation, size, complexity and requested finish.
Two similar-looking parts can arrive with different substrates, coatings, damage, preparation needs or pattern requirements. Those differences affect the work required.
Yes. See how the hydrographics and water-transfer printing process works, from preparation and base color through activation, transfer and clear coat.
Browse the hydrographic film catalog, then carry the pattern you like into your project quote.